Technical web pages are listed below which are suited to more advanced readers.

We are constantly updating these pages time permitting as there is so much to communicate and so much misinformation to correct.

Page: Detail
A Classification of Magnesium Cements We have developed a draft classification system for magnesium cements. The table presented here is not "set in concrete" and constructive criticism is invited.
Advances in TecEco Technology - 10 Years on This page summarises advances in TecEco Technology over the last 10 years with a focus on exemplars.
Solving Autogenous Shrinkage for Greener Concrete Autogenous shrinkage is the bane of high strength concretes. Although reactive magnesia should be used for many reasons in dense concretes, this page explains how a small percentage added to dense concretes solves the autogenous shrinkage problem. As a consequence less cement can be used and more durable concretes are the main outcome.
Changing Permissions and Rewards Systems to Get Ready for Carbon Trading and Meet the Sustainability Challenge This page discusses ways to green concrete profitably and explains how prescription based standards and green point criteria as they are currently worded are a hinderance rather than help
Fire Resistant Buildings using TecEco Binders

The recent bushfires in Australia make it more urgent to develop composites that have both "R" value and specific heat capacity. This page discusses the causes and options for dealing with bushfires.

Ground Limestone in Portland Cement - A Good Idea or Lost Opportunity From a particle packing perspective ground limestone is a good idea. But what the about the chemistry? Find out what we think on this page.
Magnesium Hydroxide Nano Composites This page discusses the amazing ability of magnesium hydroxide to form complex layered double hydroxide (LDH) compounds with many other substances. This property is important because it is why magnesium hydroxide is so useful to lock up wastes and is related to how it can bonds so easily with other substances
Modernising Roman Methods of Placing No or Low Slump Concrete The Romans placed concrete relatively dry and the durability of their structures is without question. This article argues that it woud be more cost effective and result in better concretes if we modernised and adopted their methods.
Other Magnesium Minerals in Concretes Magnesium occurs in many different forms in cements. The only one that is dangerous is Periclase which is a high temperature mineral formed if magnesium is present during the clinkering process. This page describes some of these other forms.
Permecocrete Porous Concrete This page discusses in depth the water cycle, salinity, pollution and water shortages and the Permecocrete solution.
Reactive Magnesia Cements - A Blog

Comments by our managing director about his experiences with reactive magnesia in hydraulic cements.

Reactive Magnesia - A Theoretical Explanation of Properties

Reactive magnesia is the most powerful new tool in cement chemistry today and on this page we explain the unique properties it imparts to concrete..

Rheological and Shrinkage Reduction Affects of Adding Reactive Magnesia to Concretes

TecEco cements containing reactive magnesia[1] have a thixotropic rheology with low sag and high stick. They do not bleed much and have low shrinkage. There are physical and chemical reasons for these characteristics that are explained on this page.

The Importance of Temperature for the Manufacture of Reactive Magnesia TecEco prefer to use reactive magnesia which is essentially amorphous magnesia with low lattice energy made at low temperatures and finely ground.
The Use of MgO by the Chinese The Chinese have been using magnesia in concretes, particularly for Dam manufacture since the 1970’s and this page explains the difference between their technology and ours.
TecEco Cements We are striving all the time to explain TecEco cements to others. This page is a more comprehensive attempt to communicate the salient features to people like engineers..
The Importance of Particle Packing

Particle packing is taught as part of basic materials processing courses at engineering schools but is poorly understood in the concrete industry. An understanding of the basics is important when making concrete and TecSoft Pty. Ltd., an associated company of TecEco are working on software that will incorporate the science of particle packing as the lack of understanding is proving a problem for the implementation of our cements.